AEP EUI & Key
I am trying to add a node with the lora-query tool and wondering how could I get the EUI & Key for the AEP. The doc says if I use Name & Passphrase they would be converted to EUI & 128-bit...
View ArticleReply To: Using Existing custom firmware, on MDot intended for Australian...
Any thoughts Multitech team? Thanks, Ajay
View ArticleReply To: Installation of additional IPK-packages after flashing
Hi Jeff, thanks again for your help. We chose to add a script (in the flavor the reset-handler) which is run at each boot. It checks whether a file exists on the rootfs-partition. If the file does not...
View ArticleReply To: AEP EUI & Key
The network server has a command port. You can query it for current config which will contain the EUI and KEY as well as the name and passphrase....
View ArticleReply To: Using Existing custom firmware, on MDot intended for Australian...
Ajay, US dots should only be deployed in the US. You need to deploy AU dots into the AU region. Current firmware & library implementation doesn’t allow a US dot to operate on AU frequencies or...
View Articlenot mbed compiler
Hello, what library i must use to develop bare metal whit xdot, for example using Iar, Keil or GnuArm compilers? Thanks Claudio
View ArticleReply To: not mbed compiler
Claudio, mbed applications can be compiled using IAR, ARM, and GCC_ARM toolchains. Are you desiring to work offline instead of using the online compiler? If so, check out mbed-cli:...
View ArticleReply To: Using Existing custom firmware, on MDot intended for Australian...
Thanks Mike for taking the time to respond. Just a follow up question regarding the comment mentioned below: Current firmware & library implementation doesn’t allow a US dot to operate on AU...
View ArticleClik here to view.
2017 Нелюбовь смотреть онлайн бесплатно
Нелюбовь СМОТРЕТЬ ONLINE нелюбовь 302 268 фильм нелюбовь 155 717 нелюбовь звягинцев 142 362 нелюбовь смотреть 77 485 фильм нелюбовь звягинцев 72 300 нелюбовь 2017 63 778 смотреть фильм нелюбовь 59 900...
View ArticleNon-Polling rCell or other
Dear, We have now a few iSMS modems for some projects in use. But it isn’t available anymore. The only thing we need is SMS receiving to HTTP server request (Non-Polling please). The supplier suggest...
View ArticleAccessing Multitech from internet (cellular) with SSH
Hi! We have some gateways on sites and I should be able to access those with SSH to have access to the console. I have enabled the SSH connection from WAN (Administration – Access Configuration – SSH...
View ArticleSubscribe to news updates
Hello, I am looking for a way to obtain updates when entries are added to the “News” section of this site. Many of the RSS feeds links do not work. Thank you, Parker
View ArticleReply To: Instructions for installing python packages no longer work.
Hi Jeff. I’m having the same problem as the original poster. I’m on mLinux Version 3.3.6. I want to try modifying openssl.inc file but I can’t seem to find it anywhere. Where exactly is this file...
View ArticleMaximu Throughput
Hello, I have a Multitech Conduit with LORA card (US model). I am using the RAK811 to send messages every time it receives the ack, the problem is that after sending ~8 messages (~1 second per...
View ArticleReply To: ADR – How can you tell if node has enabled it?
Hi Lawrence, I had asked a similar question a while back, look at Mike Fiore’s response to figure out if ADR is enabled or not correctly and can be found at the very bottom of the forum thread....
View ArticleDownlink Packets Loss.
We are observing downlink packet loss when the connection is lost to the mqtt broker such as the one mentioned below, which was seen in the node-red log. 8 Jun 19:01:03 – [mqtt] [f10b2492.0ef4d8]...
View ArticleReply To: Yocto Version
Is there an update on when this might happen? It’s pretty much Q2 of 2017 now.
View ArticleReply To: mDot not responding to AT commands
Hi Dean, You were spot on! I had done the same as you and your fix worked. Thank you
View ArticleReply To: Yocto Version
Joshua, This release will be entering testing in the next few weeks. There will probably be at least six weeks of testing time. That probably puts it at the end of July at the very earliest. Jeff
View Article