Clik here to view.
Reply To: Connecting Arduino
Sorry, it’s not the DNS that is failing. It is the DHCP. I can’t figure out what would make it fail. I extended the timeout to 2 minutes and it still fails. The strange thing is that it worked a few...
View ArticleReply To: Questions about the Cell 100 GPS model MTC-LAT1-B02
Excellent — thanks for your help! As for the serial stuff, I’m taking your advice and opening up a ticket with multitech support.
View ArticleClik here to view.
Mathematical calculations of number of end-devices to handle per gateway
Hello, I have a question about the calculation of the number of end-devices that can be handled per gateway when the duty-cycle is 1% and then to set it to 3%? With consideration of using SF=10 and...
View ArticleLORIOT Gateway last binary for MultiTech Conduit IP67
I am using a MultiTech Conduit IP67 (MTCDT-LEU1). I have downloaded the las installer version of LORIOT Gw software and after install it I have that error at start time: [2017-04-27 11:26:55.767][LOG...
View ArticleReply To: Resetting the Conduit to factory state
Hi, I’m having a similar issue with a Multitech Conduit. When experimenting with it, I accidentally added a startup script that just hangs before the shell is started on debug mode – and SSHD is not...
View ArticleClik here to view.
Reply To: Mathematical calculations of number of end-devices to handle per...
Thanks for any information on this track
View ArticleReply To: Resetting the Conduit to factory state
Eric, Unfortunately, the process that is used to do the reset from the reset button push and would do the factory default is at the end of start-up. I recommend that you create a support portal case...
View ArticleReply To: Resetting the Conduit to factory state
Hi Jeff, Thanks for your answer – I ended up using U-boot to flash the Conduit, using the debug cable, using this method:...
View ArticleReply To: LORIOT Gateway last binary for MultiTech Conduit IP67
Did you stop the Multitech lora-network-server first?
View ArticleQuerying Status of Custom App from Node-Red.
I have installed a custom App and it shows up in the Apps section in the Conduit Admin ui screen. There is a button there to Start & Stop the custom App. I was hoping to do the same from the...
View ArticleMake custom LoRa frequency plan
Hi Could someone tell me if I could make my custom channel plan/rule? I want to create a private network, but due to my local ISM band restriction, the best frequency I can use is 864-868Mhz, and work...
View ArticleReply To: Querying Status of Custom App from Node-Red.
Ajay, Details on the status of a custom application integrated with the Custom Application Management in Conduit can be found here:...
View ArticleReply To: Querying Status of Custom App from Node-Red.
Thanks Jeff for your response. I was hoping the start/stop was being executed via one of the AEP Web API Command endpoints. So currently the Web UI uses the app-manager to start and stop the...
View ArticleReply To: Querying Status of Custom App from Node-Red.
Ajay, There is an API entry point at api/customApps in the Web UI. Here is an example of stopping an app: admin@mtcdt:/var/config# curl -X POST -H ‘Content-Type: application/json’ -d ‘{}’...
View ArticleReply To: Querying Status of Custom App from Node-Red.
Hi Jeff, Thanks so much for taking the time to respond and write out a detailed way to start/stop the custom app. I did try to get the custom App Id based of the suggestion above. I am not sure why...
View ArticleReply To: Querying Status of Custom App from Node-Red.
Ajay, The LOCAL appID should work to start and stop your application. Since you did a local install, and not from DeviceHQ, your app was assigned the appId of LOCAL. Currently, the way app-manager...
View ArticleReply To: Querying Status of Custom App from Node-Red.
Jeff, I was able to both start/stop the application from node-red based of the URL you had mentioned earlier and I used the http request node. Also the LOCAL id worked perfectly well. Thanks once...
View ArticleInstructions for installing python packages no longer work.
The instructions at: http://www.multitech.net/developer/software/mlinux/mlinux-software-development/python/ No longer work correctly. EZ-Setup is no longer hosted at that location, but even when...
View ArticleConfigure Conduit mLinux LoRa for Loriot server
I cannot figure-out the DNS part in “Make sure the Conduit can resolve Internet DNS names and has general Internet access”, I can install the Loriot provided script by referring to the IP for...
View Article