SPIFFS_write failures while writting Session Info.
I have two mdots which are configured to connect to LORA using AUTO_OTA mode and one of them generates a SPIFFS_write error and the other doesn’t. Does this mean the mdot that has this error occurring...
View ArticleClik here to view.
Reply To: stop serial mode, changed mtxdot XDOT-NA1-A00 MODULE SERIAL...
When I tested it, I can not get +++ or +++ (cr) from the terminal +++ (CR) (LF). AND RESET BUTTORN must be sent within 1 second after pressing (XR21 PORT ) CHANGED TERMINAL SETUP [Oxod][oxoa] CR+LF ....
View Articlemtxdot 1:1 connection methord
Let me know how to set the at command to communicate two mtxdot modules without ap(multi conduit or access point ) 1:1 connection If it is not in terminal mode, please tell me how to set it in serial...
View ArticleReply To: Updating node-red settings.js and restarting node-red.
Ajay, You can use the command at the SSH prompt or you can go into the Web UI, got to the Apps page, disable Node-RED and then re-enable it. Jeff
View ArticleReply To: Conduit unreachable 192.168.2.1
Hi Steve. Your suggestion totally helped. We were dealing with an unrelated network issue that triggered everything and which has now been fixed. Not knowing how to get access to the gateway once a...
View ArticleReply To: mtxdot 1:1 connection methord
Hi Son, Please see the following page… http://www.multitech.net/developer/software/mdot-software/peer-to-peer/ Kind regards, Leon
View ArticleReply To: LoRa custom message descriptor
Thanks for the response. Is this the purpose of this field or does it serve some other function as well? Is there any documentation on what this call does or its purpose other than whats in mDot.h?
View ArticleReply To: LoRa custom message descriptor
It is a byte to be used by the application in LoRaWAN. It is sent as an identifier for the payload. It’s use is determined by the application. 0: mac commands in payload 1-223: application specific...
View ArticleClass A sleep between RX windows
Does the mdot or xDot sleep automatically between RX windows with Class A operation? Or is the receiver just kept on for the 2 seconds while waiting for the receive windows?
View ArticleReply To: Failed CRC check in OTAA
Hello I have similar issue to join with otaa … the Adress is Ok in the server but the device is not receiving it. How do you fix the channel mask issue ? thanks for help Pascal
View ArticleReply To: Failed CRC check in OTAA
If you’re using LoRaMac-node : mibReq.Type = MIB_CHANNELS_MASK; mibReq.Param.ChannelsMask = multitechGatewayChannelsMask; LoRaMacMibSetRequestConfirm( &mibReq ); Just set your channel mask to...
View ArticleReply To: Cannot send ACK from GW to endpoint when working as packet forwarder
Hi, Yes. That was the root cause. Now it works. Thanks!
View ArticleUnable to understand pining of mDot
Hello all, I have a very basic question : I’m not able to understand the pining of the mDot, even after reading and reading and reading the Developper Manual… What I don’t understand : the LoRA pins...
View ArticleClik here to view.
Reply To: Supported Wifi Dongles/Chipsets
OK thanks, thats seemed to have worked (partly) Using same settings (apart from SSID and Password of course) from here...
View ArticleReply To: GTWay identity , get it in node red ?
Hello Thanks for the HTTP hint to retrieve the gateway’s ID (http://127.0.0.1/api/system/deviceId). In my case, I want to have several gateways setup as packet forwarders and only one hosting the lora...
View ArticleReply To: Unable to understand pining of mDot
Olivier, We have a really nice diagram on the mbed mDot platform page that shows the pin names and different functions available on each pin....
View ArticleFailed to join network
We are trying to connect the mDot to the Conduit using the mbed compiler however it seems that the frequency is being changed from the Australian to US frequency by the libmdot-mbed5 library. What...
View Articleinstall sqlite node to node-red app
Hi there, I have got multitech AEP conduit and node-red app is running on that. I would like to install sqlite database node in node-red. Is there way to do that ? If it is then how can I do it ?...
View ArticleUsing starter kit with IBM blue mix quickstart
I can get the gateway to connect to the internet, but There seems to be no data when I enter device ID in the quickstart section of IBM blue mix. There is also no pre configured node red flow as...
View Articleusage of getIsIdle() method.
I have been so far using is getIsTransmitting method to find when I can next transmit data. I previously had not seen this method getIsIdle(), so I am assuming this can be used to determine the same,...
View Article