packet error rate
Hi , I have a mDot configured to aep conduit. What are duplicated ACKs under lora tab in statistics? Thank you
View ArticleReply To: Send error on xdot
Hi Jason, ACK is not enabled. I have my own Ack. If i got a tx error then the sx1272 stops to send any data but the program still turns. Can i reset the sx1272? thx for your answer
View ArticleReply To: Requirement for Private LoRaWAN network
Thanks Steve, Yes, by proprietary vendors, I meant the public LoRa Network Server vendors that you mention. So, if I understand correctly, I have a choice: I could use the Conduit configured as a...
View ArticleI2C issues with libmdot-mbed os5
Hi, I’m trying to upgrade to mbed-os5 but there seems to be some issues with I2C support when using libmDot-mbed5. I’m using mdot-library revision 2.0.15 and mbed-os revision mbed-os-5.1.5 When using...
View ArticleConduit Field Deployment
Hi, I have a field deployment set up for the Conduit prepared however I have found a problem when I attempt to use it to do range testing. It seems that at random (sometimes it works, sometimes it...
View ArticleReply To: Connecting analog input
hey all, A couple months have passed and we bought a developer board for prototyping. After prototyping the product will be used as a full product so we are going to develop our own board with the 40...
View ArticleReply To: I2C issues with libmdot-mbed os5
Hi Andrew, There is a problem in mbed-os version 5.1.5. If you roll back to 5.1.4, everything should work. Leon
View ArticleClik here to view.
Reply To: ADR implementation example?
Hi Jason, Your explanation is very clear, however I have the following situation : 3 LoRaWAN devices connected to a single gateway (AEP conduit with lorawan network server). 1 of the device has some...
View ArticleReply To: sending signal from AEP GW to mDot
Hi Micheal, Assuming you are using our AT command code, the payload of the down link packet will be output on the main serial port… not the debug port. I’m not sure if this might work for you but in...
View ArticleReply To: Requirement for Private LoRaWAN network
Hi Seamus Thanks for the feedback. You are correct, the Conduit can be configured as a packet forwarder or as a private LoRaWAN network. I agree, the private option may be optimal for production line...
View ArticleReply To: mdot os5 example questions.
I was wondering if I could get some clarifications regarding running i the deep sleep mode. I run additional threads in my application and during the deep sleep mode, are these threads suspended and...
View ArticleReply To: Connecting analog input
Hi Robin, I’m told we do not have a library import available for the 40 pin part. Leon
View ArticleWhere to buy a MultiConnect® rCell 500 Series?
Hello, im interested to buy a “MultiConnect® rCell 500 Series”, im from Costa Rica but i have a direction in the US, i search in eBay and amazon, but there´s only 100 series. Could someone help me and...
View ArticleMeasuring packet error rate
Hi, I am trying to measure PER between conduit aep gateway and mDot. What are they ways to measure the PER? Thanks
View ArticleReply To: Conduit Field Deployment
Hi Steve, The problem with Node-RED is that I need to have assurance that it turns on consistently as it severly hampers testing if it doesn’t automatically activate the script when turned on. Is...
View Articlesend packet to end device from gateway
Hi, I have the mDot connected to gateway and able to see payload including RSSI, lsnr and etc on the nodeRed. Now, I would like to configure mDot to receive a packet which includes the RSSI from...
View ArticleReply To: Conduit Field Deployment
Following on from above, I have implemented a Node-RED script which gives a heartbeat to whether any script is running. Basically I have the program turning on/off one of the signal lights on the...
View ArticleReply To: Send error on xdot
https://developer.mbed.org/teams/MultiTech/code/libmDot/file/0da384ba484b/mDot.h void resetRadio();
View ArticleReply To: send packet to end device from gateway
Hi Danny, The AT commands AT+RSSI and AT+SNR will display RSSI and SNR of downlink packets. Call getRssiStats() and getSnrStats() from the library to get the same information. If you are interested,...
View ArticleReply To: Where to buy a MultiConnect® rCell 500 Series?
Hello Alejandro The MultitConnect rCell 500 is a product designed to be sold and used in Europe. At this time the rCell 500 does not have the necessary certifications and approvals to be purchased and...
View Article