Hi,
I have a field deployment set up for the Conduit prepared however I have found a problem when I attempt to use it to do range testing. It seems that at random (sometimes it works, sometimes it doesn’t) the Conduit will decide not to run Node-RED meaning that my program on the Conduit to record the results locally is not being run. This is problematic as it makes range testing difficult. In case you were wondering, the LoRa server appears to be turning on as the mDot is able to connect to the LoRa server, but the Conduit is not running any scripting as I noticed this while running tests with simple send/respond scripting. Are there any suggestions on what may be the source of this problem?
Also, I was wondering if there was clear documentation on the range limits for the mDot/Conduit combination with the different data rates factored in. At the moment I have found maximums of 1.27km within urban setting and 3.56km with rural testing which are both obviously below the expected rating from the advertising. It would really help out to know what conditions were tested to get the advertised distances.