Reply To: Firmware doesn't update and gateway doesn't detect LoRa card
Try the upgrade without the lora card installed.
View ArticleReply To: Firmware doesn't update and gateway doesn't detect LoRa card
Thanks for your reply. Yep, it definitely did something as it completely crashed and I had to factory reset it. But it worked, it is now under 1.4.3 firmware version, so it’s fine Still, it doesn’t...
View ArticleReply To: Firmware doesn't update and gateway doesn't detect LoRa card
What is the output to this command? $ mts-io-sysfs show lora/*
View ArticleCan not update opkg
Hi, I got the following error when i try to do “opkg update“: admin@mtcdt:~# opkg update Downloading http://multitech.net/mlinux/feeds/3.3/all/Packages.gz. Downloading...
View ArticleReply To: Can not update opkg
Choose from one of the available folders. http://multitech.net/mlinux/feeds/ [DIR] 3.2/ 14-Jun-2016 16:57 - [DIR] 3.3.6/ 21-Apr-2017 13:05 - [DIR] 3.3.7/ 27-Jun-2017 13:16 - [DIR] 3.3.9/ 27-Jul-2017...
View ArticleReply To: Can not update opkg
I used 3.3.15 folder. then i install pip (opkg install python-pi), but i am getting the following error when I try to use it: admin@mtcdt:~# pip --version Traceback (most recent call last): File...
View ArticleLoRa Stack 4.40 and AS923 Dwell Problem
Hi I updated to LoRa Stack 4.4.0,working with STArm CPU. i am using multitech AEP MTCDT-H5-210A Firmware 1.4.3 LoRa setup is on AS923 with Both Dwell times OFF. on the end unit LoRa stack, They have...
View ArticleReply To: LoRa Stack 4.40 and AS923 Dwell Problem
33 bytes it the join accept message. The network server will send down the dwelltime params in the first few downlinks if dwelltime is enabled or one downlink if it is not enabled at the server. The...
View ArticleReply To: Can not update opkg
ok, I fix it installing setuptools as bellow: wget https://bootstrap.pypa.io/ez_setup.py -O - | python Thanks! Diego
View ArticleReply To: Can not update opkg
I have also noticed that the “opkg install python-pip” does install a functioning pip. But it must be installed before the ez_setup.py is used.
View ArticleReply To: LoRa Stack 4.40 and AS923 Dwell Problem
Thank you for the quick response I will try to raise the question at semtech support. However, the max payload check is not done on the join response. The CF List might be too long to send on the join...
View ArticleReply To: Firmware doesn't update and gateway doesn't detect LoRa card
Hi, Well, after a good night plus half a day of rest unplugged, it finally works again. I have no idea why. But thanks for your help, have a good day as you might start yours rn !
View ArticleSupported EU868 frequencies by MTCAP-868-001L
I know that frequency plan for EU868 is like this: Uplink: 1-> 868.1 – SF7BW125 to SF12BW125 2-> 868.3 – SF7BW125 to SF12BW125 and SF7BW250 3-> 868.5 – SF7BW125 to SF12BW125 4-> 867.1 –...
View ArticleReply To: Supported EU868 frequencies by MTCAP-868-001L
Five additional channels can be configured. For 863.5-867.5 they will be centered around the configured frequency. 4-> 867.1 – SF7BW125 to SF12BW125 5-> 867.3 – SF7BW125 to SF12BW125 6->...
View ArticleReply To: Accessing Conduit (MTCDT-LAT1-246A-US) remotely over cellular
Thanks for the feedback, Steve. AT&T is saying they do not offer SIM cards provisioned with public static IP addresses, though. Does that sound right to you? If so and presuming Multitech has...
View ArticleReply To: Accessing Conduit (MTCDT-LAT1-246A-US) remotely over cellular
Hi John Yes, AT&T does offer static IP’s associated with a SIM for “mobile terminate data” You won’t get this at you local AT&T store. You need to talk with a M2M/IOT division of AT&T that...
View ArticleReply To: Accessing Conduit (MTCDT-LAT1-246A-US) remotely over cellular
Hi John Yes, AT&T does offer static IP’s associated with a SIM for “mobile terminate data” You won’t get this at you local AT&T store. You need to talk with a M2M/IOT division of AT&T that...
View ArticleMTDOT-BOX not joining LoRa network from MTCDT
I’m kind of stuck. When I run “LoRa Demo” the MTDOT-BOX sits at the screen with “Joining…”, “NI=MultiTech”, “NK=MultiTech”, “DR=0 P=20 A=<counting up>”. Those names “seem” to match what I...
View Articlelora-network-server, txPktsDropped???
Hi… i have an application with 28 devices, communication cycle is 90 sec. lora-network-server seems to loose some down -messages… Is there some way to improve tx protocol? Or some options in...
View Article