Reply To: Activate GPS on MTCDT-LEU1-246A
Hello Diego Yes, we are making progress. This GPS feature in the AEP will be fixed in the next firmware release. The anticipated release at this time is early March 2018. -Best Regards
View ArticleNode-RED failing to load
I attempted (and failed) to update the node-red package on the mtcdt-246a and during the process reinstalled node-red using opkg. The node-red interface now fails to load when I try to open it from...
View ArticleReply To: Node-RED failing to load
I suggest you go back to start. Download the aep upgrade file http://www.multitech.net/developer/downloads/ Go to Admin > Firmware Upgrade This will reset the file system.
View ArticleReply To: Node-RED failing to load
Thanks for the quick reply Jason! That worked, I’ll try to avoid messing with the nodeRED package again
View ArticleReply To: private network with 2 gw
Yes, both conduits have the same APPEUI and AppKey. Yes, the End-devices got the same AppEUI and APPKey. On the end-devices the only way to change the appEUI or appKey, is locally reprogramming the...
View ArticleReply To: private network with 2 gw
You could implement a blacklist using an application In node-red use MQTT in and out nodes with a function node between. This code will clear the join accept packet out of the downlink queue. if...
View ArticleReply To: Create text file in on-board memory
The DETAILS.TXT file is in the flash of the programming module on the developer board. The mDot software does not have access to it. The boot loader can be used to send a file from the flash to a PC...
View ArticleReply To: private network with 2 gw
About the downlink queue. When a clear is sent to a specific EUI. It cleans only the queue msg for this EUI?
View ArticleTicker/Timeout of mbed-os on mDot
I make a code under mdot-library rev. 3.0.0 and mbed-os rev. 5.4.7. When a Ticker or Timeout of mbed-os is used, interrupt is not activated. I think that mdot-library may use the timer resource of...
View ArticleReply To: Ticker/Timeout of mbed-os on mDot
Doc for mbed 5 can be found here. https://os.mbed.com/docs/latest/reference/ticker.html https://os.mbed.com/docs/latest/reference/timeout.html
View ArticlePacket Forwarder missing log
Hello. I’m using the default Packet Forwarder (lora_pkt_fwd) in my Conduit and, after doing a firmware update to 1.4.3 and a factory reset, it isn’t generating the log file at /var/log. Has anyone had...
View ArticleReply To: Packet Forwarder missing log
It has been disabled in the init script. There is an update for USB packet forwarder for MTAC-LORA-1.0 cards http://www.multitech.net/downloads/lora-packet-forwarder-usb_1.4.1-r11.0_arm926ejste.ipk...
View ArticleReply To: Ticker/Timeout of mbed-os on mDot
My question is not how to use Ticker or Timeout in mbed-os…. It seems that there is conflict between mbed-os and mdot-library. Which timer module (TIMx) of STM32F411 MCU is used in mdot-library? Can I...
View ArticleReply To: Ticker/Timeout of mbed-os on mDot
The library still uses RtosTimer. Have you tried using it?
View ArticleClik here to view.
"Packet was scheduled but failed to Tx"?
Hello everyone We’re testing confirmed transmissions with a couple of nodes. Every once in a while, we have lost ack packets, but we can’t figure out why. In the packet forwarder logs, the only thing...
View ArticleReply To: Ticker/Timeout of mbed-os on mDot
Here is an example program: Ticker, Timer and RtosTimer all seem to work. https://os.mbed.com/users/jreiss/code/Ticker_libmDot/
View ArticleFirmware doesn't update and gateway doesn't detect LoRa card
Hi, I wanted to upgrade my Gateway from a version 1.2.2 to a version 1.4.3. I followed the step recommended by Multitech, which is to update first to 1.3.3 to keep the configuration. This step worked...
View Article