Reply To: connexion entre mon produit Adeunis et la multitech
That console is connected to the conduit. It is the linux environment. Try another port to connect to the Dot. Drivers may be needed before the ports appear in windows....
View ArticleReply To: connexion entre mon produit Adeunis et la multitech
j’ai suivi le tutoriel j’ai téléchargé les pilotes et quand j’ai démarrée les pilotes ils et cliqué sur installer cela ma écrit : the driver not be installed.No mbed Microcontrollers were found....
View ArticleReply To: connexion entre mon produit Adeunis et la multitech
You are using Adeunis so the mDot command-line function examples cannot be used. The documentation will only help for the Conduit side.
View ArticleClik here to view.
Reply To: connexion entre mon produit Adeunis et la multitech
je n’ai pas compris votre dernier message. je vais essayer un truc simple pour comprendre la logique. je voudrait juste envoyer des trames de donnes sur ma multitech et les recevoir sur le site...
View ArticleReply To: connexion entre mon produit Adeunis et la multitech
In Node-RED use lora-in to receive packets from the end-device, use lora-out to send back to end-device. Add lora-in and lora-out nodes to flow with function node between them. Put this code in the...
View ArticleReply To: connexion entre mon produit Adeunis et la multitech
<a href="https://ibb.co/kcYxXw"><img src="https://preview.ibb.co/c2J9eb/photo_node_1.png" alt="photo_node_1" border="0"></a> <a href="https://ibb.co/deV5Kb"><img...
View ArticleReply To: connexion entre mon produit Adeunis et la multitech
That looks correct. Are you able to see uplinks from the device in the debug?
View ArticleReply To: connexion entre mon produit Adeunis et la multitech
You must have meant to say “reçois rien pourtant” unless your machine is laughing? I guess that answers my last question. You are not seeing uplinks. Does the device join successfully? You can add an...
View ArticleClik here to view.
Reply To: connexion entre mon produit Adeunis et la multitech
Bonjour Jason Reiss, Merci encore pour touts vos réponses. Voila j’ai fait se que vous m’avez demander mais pour le nœud MQTT il y a pas d’information donc je suppose que mon appareil n’est pas...
View ArticleReply To: connexion entre mon produit Adeunis et la multitech
The MQTT topic should be “lora/<DEV-EUI>/+” This will receive all events from the network server Replace the “+” with “up” to receive only uplinks, this would be the same as lora-in node....
View ArticleClik here to view.
Reply To: Conduit not communicating on subnet
So it seems that after the conduit is booted, and I issue: ifconfig eth0 down ifconfig eth0 up I suddenly get access to the conduit at 192.168.2.6/30. Is there maybe a way to do this automatically...
View ArticleNode-Red fails to load
Node-Red will display loading screen for several minutes, once loaded only item displayed is the top black bar. Looks likes it fails to load the palettes. Any advise would be great. node-red.log print...
View ArticleClik here to view.
Reply To: Node-Red fails to load
That didnt work! This reply was modified 13 minutes ago by Dalibor Labudovic.
View ArticleWifi networks not visible on 247A
Hi All, I have a wifi enabled conduit (247A) and with the Wifi as WAN enabled, I am not able to see SSID’s on surrounding wifi networks. I saw them once under Wireless -> Wifi as WAN section and...
View ArticleClik here to view.
Reply To: DNS Settings (mlunix)
Note: I am using the AEP model. I would also like a solution to this. Have the exact same issue. /etc/network/interfaces: # Wired interface auto eth0 iface eth0 inet static address 10.5.90.6 netmask...
View ArticleReply To: Descrypt MQTT package.
Hello Jason, thank you for your answer. However, we don’t get to decrypt the whole byte sequence. With your link, we transform “VPokJSksT4jBM/w4N1I=” into “54FA2425292C4F88C133FC383752″, which turns...
View ArticleReply To: connexion entre mon produit Adeunis et la multitech
Bonjour, merci pour vos réponse rapide. j’ai modifier les nœuds comme vous m’avez demandez et il y a toujours pas de communication. j’ai contacté le support technique de Adeunis et il mon répondu ça :...
View ArticleClik here to view.
Can not register network-server
Hi, I am trying to use the active LoraWAN gateway registered in (TTN networks) but I am not able to register the existing gateway through Lora APP server api.I have info of the gateway like EUI and...
View ArticleConfigure Conduit mLinux model after factory reset
Hi, I had my Conduit working happily with TTN, but had to perform a factory reset after separately trying out the Mutitech basic packet forwarder with a private back-end server. Running the...
View Article