Reply To: MDot JoinBack off Concept?
getNextTmMs will only return a value in US915 in a join backoff scenario. Check it after a join failure.
View ArticleClik here to view.
When I put a netmask type C conduit AEP fails
Hi everyone, when I put in my AEP conduit to netmask type C like 255.255.255.224 the gateway lose network connection and if I try to access it by a browser with the IP that I put in does not Work; but...
View ArticleReply To: MDot JoinBack off Concept?
This was in the MDot logs, how come we are getting such a big number from the getNextTxMs for the join backoff interval? The percentages called out in the Join Backoff features, is that a function of...
View ArticleGNSS on PCIe mini card / PPS
I recently acquired a nice PCIe mini card with a GNSS as time server for LoRaWAN Class B. The module is a REYAX RYP820N, which maps it’s PPS to pin 42. Is there a way to configure pps_gpio to make use...
View ArticleInit script not working
Hi, I would like to create an init script to autorun some commands at the Counduit startup. I have used the following guide: https://wiki.openwrt.org/doc/techref/initscripts but there are problems...
View ArticleClik here to view.
Reply To: When I put a netmask type C conduit AEP fails
I’m trying to set the IP 172.17.22.4 with net mask 255.255.255.224 This reply was modified 14 hours, 41 minutes ago by centro de gestión de redes.
View ArticleReply To: How to interpret LoRa Demo data ?
“DgL/DwgF/IAFANYLAWM=” => ’0e02ff0f0805fc800500d60b0163′ 0e 02ff0f Accel 08 05fc80 Pres 05 00d6 Lux 0b 0163 Temp
View ArticleReply To: MDot JoinBack off Concept?
Hi Jason, The other thing we noticed that is the getNextTxMs returns a non-zero value right after a join fails, I thought for US915, this should always return a zero, until we encounter a join-back...
View ArticleStuck in auto join loop
configured mDot for AUTO OTA join mode At+NJM=2 however upon power up the mDot can not join and is stuck in a loop Tried +++ to no avail. Any assistance would be appreciated. Joining network… Waiting...
View ArticleReply To: Using RS485 and LoRa card together
Hi Jeff Thank you for your help, I will look into using the LoRa Network Server and MQTT (MQTT is new to me). I think you help have save me a lot of time, appreciate it! James
View ArticleReply To: MDot JoinBack off Concept?
Just another update, so we have either put the mdot to sleep for a period equal to the join back off or a larger interval as much as 5 minutes when we have over 12 contiguous join/ack failures. Here...
View ArticleConduit with ARMv6 cpu so we can have nodejs > 0.10?
Hi, Are there any plans to release new Conduit that will have ARMv6-compatible CPU so we can have latest version of nodejs? Thank you, Miro.
View ArticleAEP and class C lora nodes
Hi everybody, I’ve bought an AEP and I’m integrating a class C smart plug. Does anyone have noticed that AEP sometimes loses packet and have delays? I’ve noticed that sometimes packets are received...
View ArticleReply To: mDot wake – disabling pin wake during RTC wake
Mike, I’m not setting any wake pins, so there’s nothing to delete. I think it’s being automactially set by the sleep call’s wake mode. In this application, I need to unset the wake pin dynamically. If...
View ArticleReply To: mDot wake – disabling pin wake during RTC wake
Correct. We don’t have a way to unset the wake pin for waking on interrupt, so once it’s used, it will remain in effect. You could try declaring a DigitalIn/DigitalOut/etc (something that doesn’t...
View ArticleReply To: How to interpret LoRa Demo data ?
It is in hex, and you do need to decide it to get the final results. For example, 0b indicates that a temperature reading is in the following 2 bytes. The table on the “Data packet format” page says...
View Article