Reply To: Multiple regions on a single hardware
I’m afraid the url of the repository dropped in my post, it’s: https://developer.mbed.org/teams/MultiTech/code/libxDot-Custom/. Okay, so a single xDot for multiple regions is asking too much. But do...
View ArticleReply To: Node-Red LORA Out Node & MDot that has not joined yet!
Hi Jason, Thanks for your response. Is there a way to get a list of nodes that have joined the lora network from the node-red flow and so I can check before queuing those packets? Thanks, Ajay
View ArticleDownlink port(FPort) is always 1
Hello, Is there a way to change the downlink port in the AEP conduit? The “lora out” node has a field named “Port” for setting the FPort. I have changed it but with no luck. Every time the conduit...
View ArticleReply To: IPv6 support for cell interface
Hi Mike; Indeed. My apologies for the vagueness. Primarily the MTCDT-LVW2-210A-US as it’s Verizon that’s going to stop handing out static IPv4 addresses. Secondarily. MTCDT-H5-210A-US-EU-GB in case...
View ArticleHi I have a question about the antenna.
Can I use the ANT-915-05-RPSMA product instead of the AN868-915A-1HRA product?
View ArticleUsing TTNmapper with MultiConnect® mDot™ Box
I want to use the MultiConnect® mDot™ Box for site surveying my TTN Gateway with http://ttnmapper.org For this, HDOP and altitude values of GPS are missing in “Site Survey GPS” mode of the box. Is...
View ArticlelibxDot-dev-mbed5 15de249aa75f Radio Rx CRC error
The latest https://github.com/MultiTechSystems/libxDot-dev-mbed5 (db68b184a09f) does not work for me. Both with https://github.com/ARMmbed/mbed-os/tree/mbed-os-5.3.4 (269f58d75b75) and...
View ArticleReply To: Install actility thinkpark on conduit aep
I installed actility firmware and I want to go back to mlinux from Multitech. Actility does not provide the user and password for the SSH access. It is not the default from Multitech. How can I...
View ArticleSetting the apnString for the PPP connection.
We have Conduit AEP specifically tailored for verizon, MTCDT-LVW2. However when I go to the Cellular configuration screen under the modem configuration typically there is an APN field. However on this...
View ArticleClik here to view.
Reply To: Determine deep sleep duration
I completely overlooked that the RTC survives a deepsleep. So time() is just what I need, thanks. We expect our sensors to go to deepsleep about 50.000 times during their life time. EEPROM handles...
View ArticleReply To: Setting the apnString for the PPP connection.
Hello Ajay In the vast majority of 4G Verizon installations the APN is already programmed into the modem from the factory, in a unique case where you have requested from Verizon “mobile terminated...
View ArticleCannot send ACK from GW to endpoint when working as packet forwarder
Hi, In one of our projects we want to use Conduit as pocket forwarder for our custom LoRa server. Currently we are able to pass packet from end-device to server through GW, send ACK from server to GW....
View ArticleClik here to view.
Reply To: Install actility thinkpark on conduit aep
There is a process, but its a little involved. Can you open a support case? This reply was modified 48 minutes ago by Peter Ferland.
View ArticleReply To: mdot_rtc_battery_backup
Hi Evangelos, Sorry but the VBAT pin is not externally available on the mDot. It is tied directly to VDD. Kind regards, Leon
View ArticleReply To: Cannot send ACK from GW to endpoint when working as packet forwarder
I would expect a pull response from the network server to be logged. # PULL_DATA sent: 2 (0.00% acknowledged) # PULL_RESP(onse) datagrams received: 0 (0 bytes) # RF packets sent to concentrator: 0 (0...
View ArticleActility LRR Thingpark on Conduit mlinux
Hello, I installed actility LRR firmware as the FAQ from ThingPark describes. To use my gateway with actility, the device must be validated by Actility but I do not have any answer from them. So, I...
View ArticleReply To: Install actility thinkpark on conduit aep
Thank you Peter. I oppened a thread: http://www.multitech.net/developer/forums/topic/actility-lrr-thingpark-on-conduit-mlinux/ Regards.
View ArticleReply To: Setting the apnString for the PPP connection.
Thanks Steve for taking the time to respond. I did log a ticket and we got the necessary support from your support team. Thanks, Yogesh
View ArticleMultiConnect Conduit NodeRed Serial Port
Hi All, Just a quick question if the serial port can be read/write through NodeRed on the MultiConnect Conduit…. is this a standard function or does it need hacking to make it work??? Cheers Michael
View ArticleReply To: MultiConnect Conduit NodeRed Serial Port
Michael, Do you mean a MTAC serial card port or something else? Jeff
View Article