Reply To: Access to the MQTT broker
Thanks; just what I needed. Running Paho on Python.
View ArticleFind Log
Hallo to all i am trying to access the log of the last days but i cant find the way. I only see the last 24h. Can anyone help ? takis
View ArticleReply To: Find Log
What product do you need help with? On most systems the logs are rotated so as to not exhaust the system of RAM. The logs are kept in RAM so they do not wear out the flash. Depending on the level of...
View ArticleReply To: Find Log
to be specific i can see only the last hours. Is there any way to see the last 24h? 2) is there any way to see the log of the cellular connection? thank you a lot
View ArticleReply To: Find Log
You will have to be more specific about the product you are using. Have you looked at this file? /var/log/ppp_trace
View ArticleReply To: Find Log
MultiConnect® Conduit – Application Execution Platform MTCDT-210A Firmware1.4.16
View ArticleReply To: Connection of packet forwarder as range extender / network bridge
I would like to do the same than Boyko. Being the packet forwarder always involved in the uplink and downlink messages I guess it could be possible setting up the Conduit in Packet Forwarder Mode. I...
View ArticleReply To: Connection of packet forwarder as range extender / network bridge
Hi Fernando, We managed to solve our problem with a work-around. It is not possible to associate one gateway to the other gateway thru the Lora cards. So we have following setup: - Gateway 1 receives...
View ArticleNode red dashboard
Dear all, I try to install node red dashboard package on my conduit AEP, but without success.. ( https://flows.nodered.org/node/node-red-dashboard ) So my question is : Are we able to install other...
View ArticleReply To: Node red dashboard
Some node modules require cross compiling of c++ which cannot be done directly on the Conduit. On AEP 1.4.16, you could try install from command line. # /etc/init.d/node-red stop # npm install...
View Articlebridging multitech conduit with raspberry pi
Hello, so currently I am having an issue with the range of the pi. The mdot cannot join to the pi so my boss said to make it join the multitech conduit since the tx power is much higher than the pi,...
View ArticleReply To: Connection of packet forwarder as range extender / network bridge
Hi Boyko, Thank you very much for your answer. I will try your solution. In the incoming days, with more time, I will explore the solution using the packet-forwarder and 2 radios. I can’t understand...
View ArticleLinux command to get Conduit serial number
Good Day - We’re currently using a Node-RED “system command” node with ifconfig to parse out the mac address for a given Conduit. Does anyone know if there’s a Linux command or other mechanism to get...
View ArticleReply To: Linux command to get Conduit serial number
Hi William For the Conduit serial number try the Linux command mts-io-sysfs show /device-id -Best Regards
View ArticleReply To: Linux command to get Conduit serial number
Thank you, Steve – works great! Best, William
View ArticleOutstation Cab Service | Wagon Cab
Wagon Cab is an Indian start-up cab service that works on app-based model. They offer completely transparent and affordable services which helps the customers to save more and drivers to earn more....
View ArticleDL configuration
I recently got the Conduit AEP and I want to change the state of an Adeunis Dry Contact relay. This device is a class A node, so I configurated it to be alive as much time as possible in order to not...
View ArticleClik here to view.
Lora Server 2.0.19, stops publishing on broker after downlink
Hi, I have an application with 40 sensors. Certain frames from these require downlink responses. Sometimes the lora-network-server suddenly stops publishing new events on the MQTT broker when a...
View ArticleReply To: DL configuration
Not sure what you have tried. Only through the GUI or using Node-red or other application? http://www.multitech.net/developer/software/aep/lorawan-aep/downlink-queue/...
View ArticleReply To: Lora Server 2.0.19, stops publishing on broker after downlink
Please open a ticket at support.multitech.com to share config and log files.
View Article