Clik here to view.
Reply To: AT+CCLK? Returns year 2025 for 7 hours a day
I will try that and test it tonight. I can’t imagine time-zone being 7 years off, but I will try anything .
View Articlemdot without programmable header
Hi there, Is there any document about the differences between: MTDOT-915-X1-SMA 915 MHz XBee LoRa SMA NAM and MTDOT-915-X1P-SMA 915 MHz XBee LoRa SMA w/Programming Header NAM in terms of theirs...
View ArticleReply To: Hang when using serial.attach
Hi there, i have the same problem, i use this https://os.mbed.com/cookbook/Serial-Interrupts to. And a side note, dot examples doesn’t have a serial (uart) communication example. Chears
View ArticleReply To: Hang when using serial.attach
The AT Firmware is an example of using the serial port with mDot https://os.mbed.com/teams/MultiTech/code/Dot-AT-Firmware/ Here is the serial class used in AT Firmware...
View ArticleReply To: USB to serial device
Hello I am also interested in this. Currently I use a slot for lora and another for the serial port. If I could use a USB 2 serial port, I would use two lora cards. It’s possible ? Can I use a...
View ArticleConfigure WiFi as WAN in mlinux
Hi, I had AEP multitech conduit which i converted to mlinux following the instructions (http://www.multitech.net/developer/software/mlinux/using-mlinux/flashing-mlinux-firmware-for-conduit/). Right...
View ArticleReply To: wifi for mlinux Conduit
Hi, did you solve the problem? If yes, Could you share your solution Best Regards
View ArticleXdot in Linux only ttyACM0 is created there is no ACM1
Hello, When I connect my xDot to Ubuntu only ttyACM0 is created. There is no ACM1. Any ideias why ? When I plug the module a drive is created with XDOT name. Everything appears OK. But there is no...
View ArticleReply To: Xdot in Linux only ttyACM0 is created there is no ACM1
Install exar driver http://www.multitech.net/developer/software/dot-box-and-evb-software/configuration-mode/
View ArticleReply To: Xdot in Linux only ttyACM0 is created there is no ACM1
Jason, I’m using Ubuntu. I think there is no need for driver,yes ? Thanks.
View ArticleReply To: Xdot in Linux only ttyACM0 is created there is no ACM1
https://www.exar.com/design-tools/software-drivers
View ArticleClik here to view.
Reply To: Create text file in on-board memory
I’ve opted to try to use an SD card for my application. With mbed’s sd-driver library, I’m experiencing troubles performing sd initialization with its init() function and mount() from their...
View ArticleReply To: USB to serial device
It is not reliable to use two LoRa cards with MTCDT, since the power supply would be marginal, and it would be unreliable. A Serial port uses less power. It should be possible to use serial to USB...
View ArticleReply To: Configure WiFi as WAN in mlinux
For WiFi access point, see this: http://www.multitech.net/developer/software/mlinux/using-mlinux/wifi-access-point/ For station, see this:...
View ArticleReply To: Yocto Version
thats nice to hear, can u give any forecast when u will release mLinux 4? is there any beta tester programm?
View ArticleReply To: Node-red upgrade
Any update on when AEP 1.5.0 and Node-RED 0.15.3 will be released? We need the new Node-RED MQTT broker nodes that support certificates instead of username and password. Thanks! Bill
View ArticleReply To: Node-red upgrade
Node-RED 0.15.3 in AEP 1.4.14 available on the Downloads page. http://www.multitech.net/developer/downloads/
View ArticleReply To: Node-red upgrade
That’s great news, Jason – will take a look. Thank you! Bill
View Article