Basic Station Protocol LBT Property for MTCDT-LEU1

Hi, everyone. Recently, I am testing basic station protocol on MTCDT-LEU1 with TTN open stack. Other functions have already worked well except Listen-Before-Talk functions.

I have updated the FPGA as follows:
mtcdt:/opt/lora# mts-fpga-loader -c
Checking hardware compatibility
Found Valid Hardware: MTAC-LORA-1.5
Valid FPGA version: 33

And in the station.conf, I create the lbt function:
{
“SX1301_conf”: {
“lorawan_public”: true,
“clksrc”: 0,
“pps”: true,
“device”: “/dev/spidev0.0″,
“chan_FSK”: {“bandwidth”: 125000, “datarate”: 50000, “enable”: true, “if”: 300000, “radio”: 0},
“chan_Lora_std”: {“bandwidth”: 250000, “enable”: true, “if”: -200000, “radio”: 0, “spread_factor”: 7},
“chan_multiSF_0″: {“enable”: true, “if”: -400000, “radio”: 0},
“chan_multiSF_1″: {“enable”: true, “if”: -200000, “radio”: 0},
“chan_multiSF_2″: {“enable”: true, “if”: 0, “radio”: 0},
“chan_multiSF_3″: {“enable”: true, “if”: -400000, “radio”: 1},
“chan_multiSF_4″: {“enable”: true, “if”: -200000, “radio”: 1},
“chan_multiSF_5″: {“enable”: true, “if”: 0, “radio”: 1},
“chan_multiSF_6″: {“enable”: true, “if”: 200000, “radio”: 1},
“chan_multiSF_7″: {“enable”: true, “if”: 400000, “radio”: 1},
“radio_0″: {“enable”: true, “freq”: 923600000, “rssi_offset”: -162, “tx_enable”: true, “type”: “SX1257″},
“radio_1″: {“enable”: true, “freq”: 922600000, “rssi_offset”: -162, “tx_enable”: false, “type”: “SX1257″},
“tx_gain_lut”: [
{"dig_gain": 0, "mix_gain": 11, "pa_gain": 0, "dac_gain": 3, "rf_power": -6},
{"dig_gain": 0, "mix_gain": 13, "pa_gain": 0, "dac_gain": 3, "rf_power": -3},
{"dig_gain": 0, "mix_gain": 9, "pa_gain": 1, "dac_gain": 3, "rf_power": 0},
{"dig_gain": 0, "mix_gain": 10, "pa_gain": 1, "dac_gain": 3, "rf_power": 3},
{"dig_gain": 0, "mix_gain": 12, "pa_gain": 1, "dac_gain": 3, "rf_power": 6},
{"dig_gain": 0, "mix_gain": 10, "pa_gain": 2, "dac_gain": 3, "rf_power": 10},
{"dig_gain": 0, "mix_gain": 11, "pa_gain": 2, "dac_gain": 3, "rf_power": 11},
{"dig_gain": 0, "mix_gain": 11, "pa_gain": 2, "dac_gain": 3, "rf_power": 12},
{"dig_gain": 2, "mix_gain": 12, "pa_gain": 2, "dac_gain": 3, "rf_power": 13},
{"dig_gain": 0, "mix_gain": 13, "pa_gain": 2, "dac_gain": 3, "rf_power": 14},
{"dig_gain": 0, "mix_gain": 15, "dac_gain": 3, "pa_gain": 2, "rf_power": 16},
{"dig_gain": 0, "mix_gain": 10, "pa_gain": 3, "dac_gain": 3, "rf_power": 20},
{"dig_gain": 0, "mix_gain": 12, "dac_gain": 3, "pa_gain": 3, "rf_power": 23},
{"dig_gain": 0, "dac_gain": 3, "mix_gain": 13, "pa_gain": 3, "rf_power": 25},
{"dig_gain": 0, "dac_gain": 3, "mix_gain": 15, "pa_gain": 3, "rf_power": 26},
{"dig_gain": 0, "mix_gain": 15, "dac_gain": 3, "pa_gain": 3, "rf_power": 27}
]
},
“lbt_conf”: { “enable”: true, “rssi_target”: -80, “rssi_offset”: -165 },
“station_conf”: {
“log_file”: “stderr”,
“log_level”: “DEBUG”,
“log_size”: 10000000,
“log_rotate”: 3,
“TC_TIMEOUT”: “2s”
}
}

But when I running the ./station, the log shows back:
2020-08-20 16:31:23.994 [RAL:WARN] Ignoring unsupported/unknown field: lbt_conf
2020-08-20 16:31:23.994 [RAL:WARN] Ignoring unsupported/unknown field: antenna_gain
2020-08-20 16:31:23.994 [RAL:WARN] Ignoring unsupported/unknown field: lbt_cfg

This means the lbt function is not working. I have also checked the ttn stack and the frequency plan has already been configured as AS923_9235_lbt.

So, anyone knows to solve this issue?

Thx so much.