Sorry! I should have thought to do that to include in the initial request!
This been at:
Switching slow clock to external oscillator…
for a few minutes.
_ _____ ____
/ \ | ____| | _ \
/ _ \ | _| | |_) |
/ ___ \ _ | |___ _ | __/_
/_/ \_\(_)|_____|(_)|_| (_)
MultiTech Systems Application Execution Platform with mLinux GNU/Linux
mLinux 3.3.5 mtcdt /dev/ttyS0
Version: 1.4.1
Date: 2017-04-07T16:31:49
mtcdt login: RomBOOT
AT91Bootstrap 3.5.3-r2 (Fri Apr 7 16:20:16 CDT 2017)
NAND: ONFI flash detected
NAND: Manufacturer ID: 0x2c Chip ID: 0x32
NAND: Disable On-Die ECC
NAND: Initialize PMECC params, cap: 0x4, sector: 0x200
NAND: Image: Copy 0x80000 bytes from 0x40000 to 0x2ef00000
NAND: Done to load image
U-Boot 2012.10-mtcdt-r6 (Apr 07 2017 - 16:20:16)
CPU: AT91SAM9G25
Crystal frequency: 12 MHz
CPU clock : 400 MHz
Master clock : 133.333 MHz
I2C: ready
DRAM: 256 MiB
WARNING: Caches not enabled
NAND: 256 MiB
*** Warning - bad CRC, using default environment
In: serial
Out: serial
Err: serial
vendor-id: Multi-Tech Systems
product-id: MTCDT-210A
device-id: 19146912
hw-version: MTCDT-0.0
mac-addr: 00:08:00:4a:1d:66
Net: macb0
Hit any key to stop autoboot: 0
Loading from nand0, offset 0x200000
Image Name: mLinux/3.12.27/mtcdt
Image Type: ARM Linux Kernel Image (uncompressed)
Data Size: 3081325 Bytes = 2.9 MiB
Load Address: 20008000
Entry Point: 20008000
Bit flip in data area, byte_pos: 960, bit_pos: 0, 0x55 -> 0x54
RomBOOT
AT91Bootstrap 3.5.3-r2 (Fri Apr 7 16:20:16 CDT 2017)
NAND: ONFI flash detected
NAND: Manufacturer ID: 0x2c Chip ID: 0x32
NAND: Disable On-Die ECC
NAND: Initialize PMECC params, cap: 0x4, sector: 0x200
NAND: Image: Copy 0x80000 bytes from 0x40000 to 0x2ef00000
RomBOOT
AT91Bootstrap 3.5.3-r2 (Fri Apr 7 16:20:16 CDT 2017)
NAND: ONFI flash detected
NAND: Manufacturer ID: 0x2c Chip ID: 0x32
NAND: Disable On-Die ECC
NAND: Initialize PMECC params, cap: 0x4, sector: 0x200
NAND: Image: Copy 0x80000 bytes from 0x40000 to 0x2ef00000
RomBOOT
AT91Bootstrap 3.5.3-r2 (Fri Apr 7 16:20:16 CDT 2017)
NAND: ONFI flash detected
NAND: Manufacturer ID: 0x2c Chip ID: 0x32
NAND: Disable On-Die ECC
NAND: Initialize PMECC params, cap: 0x4, sector: 0x200
NAND: Image: Copy 0x80000 bytes from 0x40000 to 0x2ef00000
NAND: Done to load image
U-Boot 2012.10-mtcdt-r6 (Apr 07 2017 - 16:20:16)
CPU: AT91SAM9G25
Crystal frequency: 12 MHz
CPU clock : 400 MHz
Master clock : 133.333 MHz
I2C: ready
DRAM: 256 MiB
WARNING: Caches not enabled
NAND: 256 MiB
RomBOOT
AT91Bootstrap 3.5.3-r2 (Fri Apr 7 16:20:16 CDT 2017)
NAND: ONFI flash detected
NAND: Manufacturer ID: 0x2c Chip ID: 0x32
NAND: Disable On-Die ECC
NAND: Initialize PMECC params, cap: 0x4, sector: 0x200
NAND: Image: Copy 0x80000 bytes from 0x40000 to 0x2ef00000
RomBOOT
AT91Bootstrap 3.5.3-r2 (Fri Apr 7 16:20:16 CDT 2017)
NAND: ONFI RomBOOT
AT91Bootstrap 3.5.3-r2 (Fri Apr 7 16:20:16 CDT 2017)
NAND: ONFI flash detected
NAND: Manufacturer ID: 0x2c Chip ID: 0x32
NAND: Disable On-Die ECC
NAND: Initialize PMECC params, cap: 0x4, sector: 0x200
NAND: Image: Copy 0x80000 bytes from 0x40000 to 0x2ef00000
RomBOOT
AT91Bootstrap 3.5.3-r2 (Fri Apr 7 16:20:16 CDT 2017)
NAND: ONFI flash detected
NAND: Manufacturer ID: 0x2c Chip ID: 0x32
NAND: Disable On-Die ECC
NAND: Initialize PMECC params, cap: 0x4, sector: 0x200
NAND: Image: Copy 0x80000 bytes from 0x40000 to 0x2ef00000
NAND: Done to load image
U-Boot 2012.10-mtcdt-r6 (Apr 07 2017 - 16:20:16)
CPU: AT91SAM9G25
Crystal frequency: 12 MHz
CPU clock : 400 MHz
Master clock : 133.333 MHz
I2C: ready
DRAM: 256 MiB
WARNING: Caches not enabled
NAND: 256 MiB
RomBOOT
AT91Bootstrap 3.5.3-r2 (Fri Apr 7 16:20:16 CDT 2017)
NAND: ONFI flash detected
NAND: Manufacturer ID: 0x2c Chip ID: 0x32
NAND: Disable On-Die ECC
NAND: Initialize PMECC params, cap: 0x4, sector: 0x200
NAND: Image: Copy 0x80000 bytes from 0x40000 to 0x2ef00000
NAND: Done to load image
Switching slow clock to external oscillator...