Hi members of the forum
2 years ago, we bought a multiConnect conduit from the major telecom operator of our country. W eused it on a workshop and that’s it.
Today, we want to use it, to create a private LoRa network and test our LoRa’s devices.
Our first objective is to connect a third-party device (STM32 LoRa Discovery kit -muRata LoRa inside) to our multiConnect Conduit (used as Gateway). I followed the tutorials present on Mutitech.net and the videos present on youtube.com. Until now I can not get a simple connection using AT commands.
The end-node device (STM32 LoRa discovery kit) is set as follwing:
OTAA Mode enabled
DevEui = 34:31:37:32:6B:36:91:0F
JoinEui= 01:01:01:01:01:01:01:01
Appkey = defined by ST
frequenc 868MHz
I entered this settings on the lora-netwrok-server.conf (through gtkterm using the micro-USB port). I can not establish a connection. I tried to do it through the ethernet connection : 192.168.2.1 is unreachable!!
I would know if someone as the begining of an idea that could push me on the right way to resolve this issue.
details of product
mlinux, version 3.1.0
lora-network-server, version 0.0.9.2
lora-query, version 0.0.2
I know , we never upgraded the multiConnect conduit. But i think a connection could be possible with all the versions, isn’t it?
Thansk in advance for the good person that will help me
Best regards
Serge