Has any one been able to verify the BLE power?
Setup up a Beacon and I’m only getting about 60 feet.
With 18dBM transmit power I was expecting a lot more distance.
I also can’t read or set the transmit power via hciconfig.
admin@mtcdt_concorde-1:~# hciconfig hci0 inqtpl
Can't read inquiry transmit power level on hci0: Connection timed out (110)admin@mtcdt_concorde-1:/var/log# hciconfig hci0 --all
hci0: Type: BR/EDR Bus: USB
BD Address: 88:DA:1A:9A:12:FE ACL MTU: 27:7 SCO MTU: 0:0
UP RUNNING
RX bytes:426 acl:0 sco:0 events:32 errors:0
TX bytes:0 acl:0 sco:0 commands:32 errors:0
Features: 0x3f 0x02 0x04 0x0e 0xe8 0x0d 0x41 0x85
Packet type: DM1 DM3 DM5 DH1 DH3 DH5 HV1
Link policy:
Link mode: SLAVE ACCEPT
Name: 'OptimalDesign'
Class: 0x100100
Service Classes: Object Transfer
Device Class: Computer, Uncategorized
HCI Version: 4.0 (0x6) Revision: 0x0
LMP Version: 4.0 (0x6) Subversion: 0x0
Manufacturer: internal use (65535)
Anyone work with the BLE?
running AEP 1.4.16